
VESA
The VESA mounting plate is standard and provided with all monitor arms.

QUICK CHANGE
Quick Change is a universal interchangeable monitor mount.

SECURITY SCREW
The Securety Screw locks your monitor to the arm mount. Requires torx security bit to remove.

SECURITY SET SCREW
The Set Screw locks SpaceArm into the hub.

TOUCH SCREEN
Add rotational stop knobs at each point of articulation. The knobs are easily adjustable to lock the SpaceArm and monitor into the configuration that best suits the user requirements, creating ideal working conditions.

180 ° ROTATIONAL STOP
Add a 180-degree rotational limiter to the SpaceArm hub for the prevention of monitor collisions.
STEP 2: SELECT RANGE

DIRECT
Adds 2.0” extension from center of the mount .

STANDARD ARM
Adds 6.2” extension from center of the mount .

STUBBY
Adds 6.2” extension from center of the mount .

STUBBY PLUS
Adds 12.7” extension from center of the mount .

LONG
Adds 10.7” extension from center of the mount .

XP
Adds 12.7” extension from center of the mount, plus an additional point of articulation.

LONG XP
Adds 21.3”extension from center of the mount, plus an additional point of articulation.

SIT-STAND
Adds 5” extension from center of the mount and 3.9” in height to allow monitor to adjust from seated to standing positions.
STEP 3: SELECT WEIGHT RANGE

LIGHT GAS STRUT
Will support up to 10lbs. (.90kg-4.53kg)

STANDARD GAS STRUT
Will support 5–16 lbs. (2.2kg-6.8kg)

HEAVY GAS STRUT
Will support 15-30lbs. (6.8kg-14.51kg)
STEP 4: SELECT FIXED HEIGHT

X4 EXTRUSION
Adds 4" additional height with overall height of 9" including the hub.

X6 EXTRUSION
Adds 6" additional height with overall height of 11" including the hub.

X8 EXTRUSION
Adds 8" additional height with overall height of 13" including the hub.
STEP 5: SELECT MOUNT TO SURFACE

Bolt Through
5” height for permanent installation using bolt through to fasten to workstation.

C-Clamp
5” height for temporary installation using C-Clamp fastening to work surface

Grommet
5” height for permanent installation using grommet fastening to work surface to accommodate cable routing.

Large C-Clamp
5” height for temporary installation using C-Clamp fastening to work surface

SPACEBEAM MOUNT
For mounting to SpaceBeam

SPACEBEAM 2 MOUNT
For mounting to SpaceBeam 2

PANEL MOUNT
For mounting to Panel

ABOVE DESK MOUNT
5” height for permanent installation using bolt through to fasten to workstation

COLUMN MOUNT
For mounting to Column/Channel
STEP 6: SELECT COLOR

PLATINUM

BLACK

WHITE
